FE-0720A SERIES
The FE-720A series filters are the same as our standard 720A series filters except that the connector is a standard IEC outlet. The connector is located on the output of the filter and is intended to provide filtered power for accessories etc. This filter will provide excellent common mode and differential filtering. This filter carries the UL, CSA, and TUV safety approvals
FILTERED OUTLET
Operating Voltage: 115/250 V~ Operating Current: 6, 8, 10 amps Operating Freq: 50 / 60 Hz Operating Temp: -20 / 40o C Diel. Withstand (L-C): 1500 V~ (1.0 min) Diel. Withstand (L-L): 1500 Vdc (1.0 min) Leakage Current: 1.0 ma @ 250 V, 60 Hz Max. Residulal volt: 32 volts after 1.0 sec. Insertion Loss: Curve shown is for 10 A
Order Part number: FE-0720A-6 for 6 amps FE-0720A-8 for 8 amps FE-0720A-10 for 10 amps
USA EUR
JMK Inc 15 Caldwell Dr. Amherst, NH 03031 JMK Inc Glasgow G13 1DN Scotland UK
PH: 603 886-4100 FX: 603 886-4115 email: info@jmkfilters.com PH: 44-(0) 7785310729 Fax: 44-(0) 141 589 1884
|
